top of page

WMA Regulatory Affairs Update – November 2026

23 hours ago
5 min read

Packaging EPR: A Growing Regulatory Challenge for the Millwork Industry - WMA Joins Building Industry Coalition to Address Packaging Regulations


world millwork alliance white logo centered on an image of doors prepared for shipments in a warehouse

Extended Producer Responsibility (EPR) is emerging as a significant regulatory issue for manufacturers and distributors of building products, including millwork. These laws shift much of the financial responsibility for collecting, recycling and managing packaging waste from local governments to the companies that place packaged products into the marketplace.


Under packaging EPR programs, producers may be required to register, report packaging quantities and materials, and pay fees to support recycling and waste-management programs.


The concept of EPR dates back to the late 1980s and early 1990s, when policymakers began reconsidering who should bear responsibility for products at the end of their useful lives. Packaging was among the first product categories targeted by EPR policies as it represents a significant portion of municipal solid waste and generally has a relatively short, useful life and has recently become a major regulatory issue in the United States.


With no comprehensive federal packaging EPR framework, states are developing their own programs, each with different definitions, exemptions, reporting requirements and implementation schedules. Companies operating nationally will consequently face multiple regulatory programs simultaneously.


How Packaging EPR Works

Under most state programs, producers pay fees based on the quantity, weight, and type of packaging materials they introduce into a state's marketplace. Some programs incorporate an approach known as eco-modulation, which adjusts fees based on packaging characteristics such as recyclability and recycled content. Materials that are difficult to recycle may carry higher fees, while more sustainable packaging may qualify for reduced rates.


Compliance is administered through a state-approved Producer Responsibility Organization (PRO). The nonprofit Circular Action Alliance (CAA) has been designated as the PRO in six of the seven states that have enacted packaging EPR laws. CAA manages producer registration, reporting, fee administration and recycling program implementation.


Determining who qualifies as the responsible "producer" can be complicated. State laws generally establish a hierarchy that considers the manufacturer, brand owner, licensee, importer or distributor. Depending on how products enter a state, responsibility may extend beyond the original manufacturer.


Small businesses may qualify for exemptions based on revenue or packaging volume, although eligibility and application requirements vary by state.


Packaging EPR Activity Across the Country

Seven states have enacted packaging EPR legislation, with programs at different stages of implementation.


Status
States
Enacted EPR laws
CA, CO, OR, ME, MN, MD, WA
Operational programs with fee collection
OR, CO
Legislation introduced or under consideration
MA, NH, NJ, NY, NC, VA, WI, RI
Needs assessments or studies
CT, HI, IL, RI

As additional states consider similar legislation, the regulatory burden on manufacturers and distributors is expected to increase.


Building Products Packaging Alliance Formed

Recognizing the potential impact of these requirements, several building materials industry trade associations came together this past summer to establish the Building Products Packaging Alliance (BPPA).


The coalition's mission is to ensure that building materials remain safe, affordable and available by advocating for packaging EPR policies that recognize the fundamental differences between industrial, business-to-business building-product packaging and consumer or food-and-beverage packaging.


WMA was invited to participate in the coalition's initial discussions and has become a contributing supporter of the BPPA.


The alliance is initially focusing its advocacy efforts on California, where the state's Plastic Pollution Prevention and Packaging Producer Responsibility Act (SB 54) is creating significant concerns for building-product manufacturers and distributors.


While consumer packaging was a central focus of SB 54, its broad definitions inadvertently swept in industrial, business-to-business building-product packaging that was never intended to be the bill's original focus.


For the building materials industry, packaging serves purposes that extend well beyond product containment. Building materials are durable goods designed for long service lives, and their packaging must support that durability across manufacturing, transportation, warehousing, and jobsite environments. Unlike typical consumer packaging, building materials packaging serves critical protective and functional uses that cannot be easily replaced without potentially compromising product performance, increasing damage or adding costs.


Compression bags, stretch wrap, protective films, crating and other packaging materials are often essential to protecting insulation, roofing, windows, doors and wood products from damage and moisture between the factory and the jobsite. Packaging may also carry important product identification, handling instructions and information needed for code compliance and proper installation.


The BPPA maintains that these distinctions warrant separate consideration under California’s packaging EPR regulations.


What the BPPA Is Seeking

The alliance has identified two primary advocacy objectives related to California's SB 54:

Primary objective: Secure a permanent legislative exemption for building-product packaging from SB 54 compliance obligations.


Alternative objective: If a permanent exemption cannot be achieved, pursue a negotiated, multi-year pause in compliance deadlines and fees for the building materials sector. This would provide additional time to address the industry's unique packaging requirements while supporting California's housing production and wildfire-rebuilding priorities.


California's Packaging EPR Requirements

California's SB 54 establishes an extensive regulatory framework for single-use packaging and certain plastic food service products. The law includes ambitious recycling, source reduction and packaging-design targets.


Key requirements include:

  • Producer registration and reporting: Covered producers were generally required to register with CAA and submit baseline packaging data by June 1, 2026, or pursue an applicable independent-compliance or exemption pathway.

  • Recyclability and reduction targets: By 2032, covered single-use packaging must be recyclable or compostable, subject to the law's specific definitions and requirements. Plastic packaging must also meet recycling-rate and source reduction targets.

  • Producer fees: Producers will fund program administration, recycling infrastructure and other obligations through fees based on covered packaging supplied into California.

  • Environmental mitigation funding: SB 54 establishes a $500 million annual environmental mitigation funding requirement for 10 years beginning in 2027, funded through the producer responsibility system.

  • Penalties: Violations may result in administrative penalties of up to $50,000 per day.


Who Is Covered?

California's definition of a producer can extend to manufacturers, brand owners, importers and distributors, depending on the circumstances. Covered packaging can include primary, secondary and transportation-related packaging, such as pallet wrap, crating, banding and protective materials.


Small producers with less than $1 million in annual California gross sales may qualify for an exemption, subject to application requirements.


Why This Matters to the Millwork Industry

For millwork manufacturers and distributors, packaging is an essential part of delivering a product that meets performance expectations. Doors, windows, mouldings and other millwork products require specialized packaging to prevent damage, protect finishes and maintain product integrity throughout the distribution process.


Requirements that increase packaging costs or encourage material substitutions without recognizing these functions could have unintended consequences, including higher product costs, increased damage and additional waste.


WMA's involvement with the BPPA provides an opportunity to ensure that the millwork industry's concerns are represented as these regulations evolve. While reducing packaging waste and improving recycling are important objectives, regulations must also recognize the practical requirements of protecting and delivering building products safely and effectively.


California's program is an immediate focus for the BPPA, because its implementation could influence how other states approach packaging EPR for building products in the future. WMA will continue monitoring these developments and supporting efforts to ensure that regulatory requirements appropriately account for the unique needs of the millwork industry.


As packaging EPR requirements expand, WMA encourages members to evaluate their potential exposure, understand applicable reporting and compliance obligations, and stay informed about developments that could affect their operations.


*****


Contact: Jessica Ferris

Director of Regulatory Affairs & Standards Development



bottom of page